Unit 25A, 25Floor, Wing Hing Commercial Building, 139 Wing Lok Street, Sheung Wan, Hong Kong.|
Quick Quote

Compatible With 1 Axis Stepper CNC Kit 8.5Ncm(1204oz.in) Nema 34 Stepper Motor & Driver

1-axis-stepper-cnc-kit-85ncm1204ozin-nema-34-stepper-motor-and-driver-461-1000×1000
1-axis-stepper-cnc-kit-85ncm1204ozin-nema-34-stepper-motor-and-driver–40567-1000×1000
1-axis-stepper-cnc-kit-85ncm1204ozin-nema-34-stepper-motor-and-driver–40568-1000×1000
1-axis-stepper-cnc-kit-85ncm1204ozin-nema-34-stepper-motor-and-driver-461-1000×1000
1-axis-stepper-cnc-kit-85ncm1204ozin-nema-34-stepper-motor-and-driver–40567-1000×1000
1-axis-stepper-cnc-kit-85ncm1204ozin-nema-34-stepper-motor-and-driver–40568-1000×1000

Compatible With 1 Axis Stepper CNC Kit 8.5Ncm(1204oz.in) Nema 34 Stepper Motor & Driver

There are no reviews yet.

110.00$

  • Description
  • Reviews (0)
  • Specification

Description

This CNC kit included:

  • 1 x Digital Stepper Drive 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor
  • 1 x Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm

Motor Specification

  • Manufacturer Part Number: 34HS46-5004D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 8.5Nm(1204oz.in)
  • Rated Current/phase: 5A
  • Voltage: 5V
  • Phase Resistance: 1ohms
  • Inductance: 11mH ± 20%(1KHz)
  • Frame Size: 86 x 86mm
  • Body Length: 114mm
  • Shaft Diameter: Φ14mm
  • Shaft Length: 37mm
  • D-cut Length: 25mm
  • Number of Leads: 4
  • Lead Length: 300mm
  • Weight: 1.2kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

 

Driver Specification

  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
  • Soft-start with no “jump” when powered on
  • Input voltage 18-80VAC or 36-110VDC
  • 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, over-curren protection

Reviews

There are no reviews yet.

Be the first to review “Compatible With 1 Axis Stepper CNC Kit 8.5Ncm(1204oz.in) Nema 34 Stepper Motor & Driver”

Motor Specification
Bipolar/Unipolar Bipolar
Step Angle(°) 1.8
Holding Torque (Ncm) 850
Holding Torque (oz.in) 1204
Rated Current (A) 5
Phase Resistance(ohm) 1
Inductance(mH) 5
Motor Nema Size 34
Body Length(mm) 114
Single Shaft/Dual Shaft Dual Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 14
Shaft Length(mm) 37
No. of Lead 4
Lead Length(mm) 300
Stepper Driver Specification
Frame Size(mm) 151x97x57
Driving Voltage(V) 18 - 80VAC / 36 - 110VDC
Output Current(A) 2.4 - 7.2
Microstep(Steps/rev.) 400 - 51200, 1000 - 40000
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5
Physical Specification
Weight(g) 4850

Related Products