• Description
  • Reviews (0)
  • Specification

Description

This CNC kit included:

  • 1 x Leadshine DM2282 Digital Stepper Motor Drive 80-220 VAC with 0.5-8.2A
  • 1 x Nema 42 CNC Stepper Motor Bipolar 30Nm (4248oz.in) 8A 110x201mm 4 Wires

Motor Specification

  • Manufacturer Part Number: 42HS79-8004S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 30Nm(4248oz.in)
  • Rated Current/phase: 8A
  • Voltage: 5.36V
  • Phase Resistance: 0.67ohms
  • Inductance: 11mH ± 20%(1KHz)
  • Frame Size: 110 x 110mm
  • Body Length: 201mm
  • Shaft Diameter: Φ19mm
  • Shaft Length: 55.37mm
  • Key-way Length: 35mm
  • Number of Leads: 4
  • Lead Length: 300mm
  • Weight: 1.2kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

 

Driver Specification

  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movemen
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Microstep resolutions programmable, from full-step to 102,400. It can also be set via DIP switches.
  • Soft-start with no “jump” when powered on
  • Supply voltage up to +220 VAC
  • Output current programmable, from 0.5A to 8.2A. It can also be set via DIP switches.
  • Maximum frequency: 200KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction (Reduction rate can be software configured)
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, Under-voltage, over-current, phase-error protections

Reviews

There are no reviews yet.


Be the first to review “Compatible With 1 Axis Stepper CNC Kit 30.0Nm(4248oz.in) Nema 42 Stepper Motor & Driver”

Motor Specification
Bipolar/Unipolar Bipolar
Step Angle(°) 1.8
Holding Torque (Ncm) 3000
Holding Torque (oz.in) 4248
Rated Current (A) 8
Phase Resistance(ohm) 0.67
Inductance(mH) 11
Motor Nema Size 42
Body Length(mm) 201
Single Shaft/Dual Shaft Single Shaft
Shaft Type Key-Way
Shaft Diameter(mm) 19
Shaft Length(mm) 55.37
No. of Lead 4
Lead Length(mm) 300
Stepper Driver Specification
Frame Size(mm) 200x137x81
Driving Voltage(V) 150 - 230VAC
Output Current(A) 0.5 - 8.2
Microstep(Steps/rev.) 200 - 102400, 1000 - 25000
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5